Products

Hydraulic Platen Press Machine

  • Hydraulic Platen Press Machine
  • Hydraulic Platen Press Machine
  • Hydraulic Platen Press Machine
  • Hydraulic Platen Press Machine
  • Hydraulic Platen Press Machine

*Rubber hydraulic press equipment for laboratory
* High precision and high wear-resistant to support strong load force and stable lifting
* Has two layer ,including heating and cooling plate
* Adopt electric heating and  tap water cooling system
* Feature with PID temperature control to fast heat and precisely control the temperature
* PLC Control system
*Available from 10ton to 300ton in manual and auto control

High precision lab vulcanizing machine is also known as laboratory hydraulic press equipment, it is mainly applicable for R &D in the laboratory.

This lab vulcanizing machine consists of a host, hydraulic systems, electrical control system, it is equipped with a high-performance hydraulic system, which features with automatic pressure compensation function. 

The rubber vulcanizer press machine has two working layers, its upper one is for the heating plate, which is heated by electricity and its lower one is a cooling plate, which is cooled by a tap water cooling system.

When produced, the raw rubber material is placed in the casting mold and clamped between the electric-heating flat plates, so that to apply pressure and temperature. By heating, this hydraulic press equipment would make the material shaping, testing, and serving as the basis for the ingredient of mass production.

We custom-made and supply a variety of hydraulic press equipment, they are available from 10ton to 300 ton, they are available in automatic control or manual control.

 

Specification:

1. Capacity: 10/20/25/30/50/100 tons optional
2. Temperature range: room temperature ~ 300℃,±2℃
3. Temperature controller: LED digital display, key setting input, numerical display output (optional program control type)
4. Heating method: Electrical Heating
5. Cooling method: tap water cooling (connection port of customer's own water source)
6. Heating time: about 35min at room temperature ~200℃
7. Exhaust frequency: 0 ~ 10 times can be set
8. Gradient pressure: 2 segments
9. Pressure table: 0 ~ 350kg/cm2
10. Working area: double-layer working area with upper heating and lower cooling
11. Area of the electric board: 300×300x60mm; Area of cooling plate: 300*300mmx60mm
12. Distance of pressing plate: 80mm
13. Pressing plate material: SKD chrome-molybdenum alloy
14. Pressing plate surface: HRC60 mirror chrome plating
Power source: 3 wire, AC380V, 20A three-phase five-wire, can be custom as per your needs